花粉俱乐部  logo 花粉俱乐部  因为热爱
搜索 |
[问题求助]

HITOOL读不到EC6110固件

[复制帖子标题和链接]

12183

huafans01382423742  新学乍练  发表于 2019-7-12 18:47:01 来自:浏览器

最新回复 2019-9-5 18:41:32

想备份一下固件,可是怎么也获取不到固件信息,跑码正常,说明联接好了。为什么就是没有分区列表?
huafans01382423742  新学乍练  发表于 2019-7-12 18:52:10 来自:浏览器
onnection canceled due to ownership request from another Terminal View.


Port ´COM5´ successfully obtained from another Terminal View


Bootrom start (CA)
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: May 11 2018 - 19:12:57

Reg Version:  v1.5.2\
Reg Time:     2018/08/01 16:39:44
Reg Name:     hi3798m31dms1_hi3798mv310_DDR3-1866_1GB_16bitx2_2layers.reç5

Set cpu freq

Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (root@STB-5288-01) (Nov 16 2018 - 13:30:02)


MMC/SD controller initialization.
scan edges:2 p2f:1 f2p:3
mix set temp-phase 0
scan elemnts: startp:51 endp:17
Tuning SampleClock. mix set phase:[00/03] ele:[02/17]

SDK Version: HiSTBAndroidV600R003C01SPC031_v2018060410


mmc_capacity: 0x1d21d0000

Begin to show boot logo through Logo_Main.
DispParam0.format:14, DispParam1.format:0#2
HMT_read_bootlogo_count, bootlogo_count=0
HMT_write_bootlogo_count, bootlogo_count=1
Flash write result:0x800
hotplug = 0
stDispParam1 org fmt:0!
stDispParam1 new fmt:14!
Logo_Main End.
up

SET BIT(40,0)==>x3

======== HMT_IR_getKey start Second ========
get key value 0x0  g_Left_KeyDown=0   g_Right_KeyDown=0
check remote recovery button begin
HI_Android_Authenticate,123: secure chip flag = 1

MMC read: dev # 0, block # 0, count 1 ... 1 blocks read: OK

183908 Bytes/s
HI_CA_GetAuthMode,46: Advca Signature!
CA_CMD_AdvcaAuthByPartName,742: advca_verify: kernel
CA_VerifyAdvcaImageHeader,694: Find Magic number, Image has not been encrypted
HI_CA_AdvcaVerifyByPartName,857: HI_CA_AdvcaVerifyByPartName: kernel successed
CA_CMD_AdvcaAuthByPartName,746: advca_verify success
env bootcmd:mmc read 0 0x1FFBFC0 0x3D000 0x5800; bootm 0x1FFBFC0
KERN_IMG_SIZE: "0x3bb1"

MMC read: dev # 0, block # 249856, count 15281 ... 15281 blocks read: OK

83655109 Bytes/s
Check Hisilicon_ADVCA ...
Boot hisilicon ADVCA image ...
Check Hisilicon_ADVCA ...
Boot hisilicon ADVCA image ...

Found Initrd at 0x04000000 (Size 345710 Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at 02001fc0 ...
   Image Name:   Linux-3.18.24_hi3798mv310
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    7435879 Bytes = 7.1 MiB
   Load Address: 02000000
   Entry Point:  02000000
HMT_write_bootlogo_count, bootlogo_count=0
Flash write result:0x800
   Loading Kernel Image from 0x33562624 to 0x33554432 ... OK
OK
append_ctc:153 enter
mmc_size:7457, bytesBFUsrData=2382
new bootargs:blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),50M(recovery),1M(deviceinfo),4M(baseparam),8M(logo),16M(fastplay),8M(misc),30M(factory),50M(kernel),2M(sysinfo),8M(iptv_data),50M(trustedcore),50M(securestore),500M(backup),500M(cache),1000M(system),100M(appdata),4786M(userdata),-(telepart)
ATAGS [0x00000100 - 0x00000508], 1032Bytes

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
hi_eth: hieth_mdiobus_read,73:mdio busy
hi_eth: no dev probed!
init: /init.bigfish.rc: 48: invalid command ´getprop´
init: /init.bigfish.rc: 113: invalid option ´sdcard_r´
init: /dev/hw_random not found
init: cannot open ´/initlogo.rle´
init: read misc boot info 1088/1088 bytes.
init: mount system image fail 0 times.
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p19
init: init: result is 256
init: mkdir(/ctc/app) OK#0
init: not found file and directiry in customer path
init: property ´ro.hw.sys.zroid.path´ doesn´t exist while expanding ´${ro.hw.sys.zroid.path}etc/init.thirdos.rc´
init: cannot expand ´${ro.hw.sys.zroid.path}etc/init.thirdos.rc´ while assigning to ´hmt_import´
init: property ´ro.hw.sys.zroid.path´ doesn´t exist while expanding ´${ro.hw.sys.zroid.path}bin´
init: cannot expand ´${ro.hw.sys.zroid.path}bin´ while assigning to ´hmt_export´
init: property ´ro.hw.sys.zroid.path´ doesn´t exist while expanding ´${ro.hw.sys.zroid.path}lib´
init: cannot expand ´${ro.hw.sys.zroid.path}lib´ while assigning to ´hmt_export´
init: /dev/hw_random not found
init: cmdline buffer=console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),50M(recovery),1M(deviceinfo),4M(baseparam),8M(logo),16M(fastplay),8M(misc),30M(factory),50M(kernel),2M(sysinfo),8M(iptv_data),50M(trustedcore),50M(securestore),500M(backup),500M(cache),1000M(system),100M(appdata),4786M(userdata),-(telepart) initrd=0x4000000,0x5466E quiet fci=0e2823e futc=1542346198 mem=1G mmz=ddr,0,0,36M ddrsize=0x40000000 kci=1eeb2e1 pcb=0 bom=011

healthd: wakealarm_init: timerfd_create failed
init: cannot find ´/system/bin/rild´, disabling ´ril-daemon´
init: cannot find ´/system/bin/dbus-daemon´, disabling ´dbus´
init: cannot find ´/system/bin/basicService´, disabling ´basicService´
init: cannot find ´/system/bin/ontattr´, disabling ´ontattr´
init: cannot find ´/system/bin/frontPanel´, disabling ´frontPanel´
init: cannot find ´/system/bin/mtkbt´, disabling ´blueangel´
init: cannot find ´/system/bin/dtvserver´, disabling ´dtvserver´
init: cannot find ´/system/bin/usb-driver´, disabling ´usb-driver´
init: cannot find ´/system/bin/skyplayserver´, disabling ´skyplayserver´
init: cannot find ´/system/bin/dlnaserver´, disabling ´dlnaserver´
healthd: No charger supplies found
init: property ´sys.powerctl´ doesn´t exist while expanding ´${sys.powerctl}´
init: powerctl: cannot expand ´${sys.powerctl}´
init: property ´sys.sysctl.extra_free_kbytes´ doesn´t exist while expanding ´${sys.sysctl.extra_free_kbytes}´
init: cannot expand ´${sys.sysctl.extra_free_kbytes}´ while writing to ´/proc/sys/vm/extra_free_kbytes´

Connection canceled due to ownership request from com.hisilicon.fastboot.serial.workers.BadCheckBurnerWorker.

love倾城y  新学乍练  发表于 2019-7-13 22:42:23 来自:浏览器
你好,我的盒子也是ec6110-m,我想请问一下那个盒子的ttl接线你是怎么接的?这个盒子ttl接线口没有针脚,而且口还比一般针脚细,我搞了大半天也没把先接合适,想请问下你是怎么接线的?

huafen912844982  新学乍练  发表于 2019-9-5 18:41:32 来自:浏览器
huafans01381859956 发表于 2019-7-13 22:42
你好,我的盒子也是ec6110-m,我想请问一下那个盒子的ttl接线你是怎么接的?这个盒子ttl接线口没有针脚,而 ...

用细一些的线
您需要登录后才可以回帖 登录 | 立即注册

工具下载

  • 花粉客户端官方

    Make it Possible

粤ICP备19015064号-4|备案主体编号:44201919072182| 粤公网安备 44190002003939号

Copyright © 2012-2019 华为终端有限公司 版权所有

快速回复 返回顶部 返回列表